Features
- The Stealth-Pod is a portable subwoofer enclosure that is so well-designed and universal, it will fit 1976-86 CJ7 & Scrambler and 1987-10 Wrangler.
- That's right, take it with you! Special hangers suspend the pod slightly off the tailgate and incorporate rubber pads to isolate the pod, thwarting any vibration. The Stealth-Pod's design allows it to swing with your tailgate, normal tailgate function remains unchanged. Removal is so easy simply open the tailgate (the pod also swings out and is now easily accessible), pull out the special [speaker wire] plug and lift the pod off the hangers. There's even a carry handle on top of the pod!
- The Stealth-Pod's smaller size leaves much of your cargo space intact and the portability is great for times when all cargo space is needed!
- The Stealth-Pod lives up to its name, the 10 in. subwoofer is unseen by passers-by and the pod can't be removed (in most models) unless you open the tailgate or flip down the back seat. The Stealth-Pod has Fiber-Fill inside and produces truly remarkable sound; the subwoofer fires downward on an angle, maximizing bass output and providing the low-end audio void your Jeep's probably missing. The speaker is protected from view, damaging cargo, and the elements.
- Talk about versatility at the base of the pod are little rubber feet so you can take it indoors, put it on the floor, and use it in your home stereo system!
Price:
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply to the purchase of this product.
| Product Details |
Product Description
Select Increments Subwoofer Stealth Pod, Subwoofer, & Amplifier For 1976-08 Jeep CJ & Wrangler - The Stealth-Pod should be powered by a 2-channel bridgeable amplifier. Install your amplifier in a secure, unseen place, such as under one of the seats, and run the speaker wires under the carpet and up to the pod, into the special plug. When you want to remove the pod from your Jeep, just open the tailgate, pull the speaker wire plug, then lift the pod off the custom hangers by its handle. No need to unplug or turn off the amplifier, just unplug the Stealth-Pod, that's it! The tiny 1 in. hangers installed on the tailgate are all that remain. Installation is quick & easy. The Stealth Pod's two receiving hangers and rubber bumper are pre-installed on the pod, so you only need to drill some small holes in your tailgate and mount the two male ends of the hangers. Each hanger has a base that uses four small screws. You'll have a total of eight 3/32 in. holes to drill in specific places on the tailgate, all of which is covered in detail in the installation instructions and the correct drill bit is included! The Stealth-Pod is a .70 cu/ft. sealed enclosure made of very strong, no-flex textured plastic that houses just about any 10 in. subwoofer, even subwoofers with very large magnets. All Stealth-Pods come with a 10 in. foam speaker gasket for an air-tight seal. The Stealth-Pod is available with Legacy audio components: You can get the Stealth-Pod loaded with a 10 in. Legacy subwoofer rated at 500 watts rms. Installation hardware and detailed instructions with photos are included with every Stealth-Pod. *Choose an amplifier that's 2-channel and bridgeable to power the Stealth-Pod. *Some early YJ models have a tailgate stop mechanism which will need to be removed to install the Stealth-Pod. *Placement of the Stealth-Pod interferes with JK Wranglers that have the factory subwoofer behind the rear seat. - The Stealth Pod is also available as a pod with subwoofer or pod only
